Breaking Down Assessment Validation: Steps to Validate Assessments
Breaking Down Assessment Validation: Steps to Validate Assessments
Blog Article
With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The initial validation type checks that your RTO's assessments align with the training package requirements.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.
Understanding the Two Types of Assessment Validation
Assessment Validation Unpacked
As noted earlier and in previous blog posts, validation comprises two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.
In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.
Our focus here will be on assessment tool validation.
Steps to Perform Assessment Tool Validation
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
Timing of Assessment Tool Validation
The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.
Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:
- you update your resources
- your new training products get added on scope
- course is reviewed by you against training product updates
- learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
How to Choose Training Products for Validation
Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.
Key Resources for Assessment Tool Validation
Instructional Resources
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Validation Panel
Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.
The members of your validation panel must collectively have:
Vocational competencies and industry skills relevant to the unit being validated
Up-to-date knowledge and skills related to vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the next version
Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Look For?
As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Does the assessment ensure equal opportunity and access for everyone?
Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Core Rules
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Are the assessment tools updated to reflect current units of competency and industry practices?
Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Show What You Mean
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy changing
prepare bottles, feed babies from bottles, and clean equipment
prepare solid foods and feed infants
respond to baby signs and cues appropriately
prepare and settle infants for sleep
monitor and foster age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All or Not Competent
Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Give More Specificity
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure get more info your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What sort of information can be included in a work package?
The answer may include:
Required resources
Applicable expenses
Time frame for activities
Appointed roles and responsibilities
When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolation, engineering, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administration
Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.